Did this page help you?
Help keep this information online with a PayPal donation.
See, by using these direction instead of buying a commercial pattern, you got a custom fitted piece and you saved anywhere between 5$ and 45$. If you send me some of that, I can afford the time to work in this site, instead of working on paying gigs. And we all win.
Who's Using This?
People have nicely shared costumes made with the help of these instructions:
Hmmm.... Well, this isn't much of a list.
If you'd like to share work you've done here, please contact me. I'd love to feature your work!
This charming little headcovering is a northern version of the Simple Caul, seen in a number of flemish paintings. Like the Biggins and the Simple Caul, the northen coif is comprised of a Band and a Gathered Crown. The following instructions assume that you have already made your Basic Brim Patterns. If you have not, you'll want to follow the link and do so.
This hat is appropriate for ladies with any class, but seems to have been far more common in northern areas of Europe. For the upper classes, the coif can be made of very fine cloth.
Note: These directions do not teach a modern Milliery approach to hat-making. I've completely eliminated the use of standard hat sizes and head-size ovals, because I'm assuming that most of the people reading this are *not* trying to set up a hat-making shop. The method I've worked out below works, but doesn not produce standardized patterns sizes unless you are one of the lucky few who actually possesses a standard size head.
Making Up the Band |
To make the Band, you will need your target head, fabric, a ruler, and a pen, as well as a sewing machine, thread, and scissors. In spite of this picture, we'll be using muslin for this caul. Trust me |
The bag of the coif sits back farther on the head than the Biggins. |
Start working the pattern with a strip of felt approximately 6" wide, at least 24" long. |
Set this strip around the head, pulling snugly (but not tightly), so that the corners of the strip sit along the jawline. If your strip is too long, trim it to the desired lenghth. (Unless you have an extremely large head or you are working on a child, the strip will end up between 23 and 24" long.) |
Ultimately, you want the innermost corners of the band to overlap by 1/2". |
Place your flexible rule back around the head, and mark where the ruler sits on the felt band. (I mark to the front of the ruler.) |
Remove the strip from the head. You should have markings like this. |
Optional: If you have a dressmaker's curve, use it to connect the markings with a smooth curve. |
Cut away the portion of the band that falls past the markings. This is your base pattern, without seam allowances. |
Place the felt pattern piece onto a double sheet of muslin. Mark 1/2" away from the pattern on all sides. Cut on this line. These are the pieces of the band. Place the two pieces right side to right side, and sew the three straight edges with a 1/2" seam allowance. Turn this piece right side out. Pressing is optional, but technically a nice touch. (Sorry - I don't seem to have a picture of that process.) |
Making Up the Bag |
The outside edge of your master brim pattern is the right size for making a small caul, and requires no extra work. I like that. |
It's not very exciting, but there you go.... |
Run a line of long gathering stitches about 1/4" away from the edge of the bag. |
Pull the gathering threads to gather the Bag down. You'll probably need it a little more gathered than this. |
Attaching the Bag to the Band |
Distriibute the gathers as evenly as possible, then mark the quarter points of the Bag. (Note: I am told that clever people mark the quarter points of the bag *before* they start to gather it. I never remember. It will work out basically ok no matter how you do it.) |
Pin the curved edge of the band to the raw edge of the bag, overlapping the two ends slightly at the center back. |
The Narrow French Seam |
We will be joining the parts with a narrow french seam. Start by sewing the parts together, following the line of the gathering stitches. |
We will be joining the parts with a narrow french seam. Start by sewing the parts together, following the line of the gathering stitches. |
If your stitching isn't straight and your gathering stitches will show, you can remove the gathering stitches by pulling gently on the threads |
Carefully trim the seam allowance to 1/8". Be very careful and very neat here. |
Fold the band over the raw seam allowance, so that the raw edge is encased and the seam line is visible at the edge of the fold. You'll be able to feel the bulk of the seam allowance inside the fold. Remember how you trimmed the seam allowances to 1/8"? You're now going to sew just a thread past 1/8" from the seam line, so that the edges are totally sealed. This is the narrow french seam. |
This is the hand position you'll use to guide the fabric, seen from the seamstress' view. |
The finished seam. |
Now, here's the reason for using such a fussy little seam -- it's totally finished inside. It's also a more sturdy seam, since it's sewn twice. |
Yay! How adorable is that? If you do other eras or re-enactment, you'll recognize this coif. It stuck around for a while. |
A similar coif, seen in northern paintings, is acheived by applying a little creative coif-a-gami and two pins. |
Alternately, the band can be folded back, which I think looks rather smart for a maid servant. |
